MÁY ĐO ÁP SUẤT

Tình trạng : Còn hàng

Liên hệ
MÁY ĐO ÁP SUẤT
Model: SERIES 8000
Hãng sản xuất: ZAHM & NAGEL
Xuất xứ: Mỹ

MÁY ĐO ÁP SUẤT

Model: SERIES 8000

Hãng sản xuất: ZAHM & NAGEL

Xuất xứ: Mỹ

Giá Call: 0165.226.8686

 

Since pressure gauges subjected to agitation frequently go out of adjustment, means for easily detecting and correcting such error is imperative, particularly when the gauge reading is critical, as in use with the Series 1000/2000 Zahm CO2 Gas Volume Meters and the various Zahm Piercing Devices. The Zahm Gauge Tester (Series 8000) provides a highly accurate means of re-calibrating pressure gauges in the laboratory.

NOTE: Pressure gauges can be re-calibrated by mounting them directly to one of the threeadapters supplied with the instrument. If checking the gauges on either the Series 1000/2000 CO2Volume Meters, the gauge does not have to be removed from theVolume Meter. The connection can be made directly to theGaugeTester via teVolume Meter's clampingdevice andP/N 8081 adapterwith bleeder valve.

Be sure to use the correct adapter for the gauge being tested as gauges with 1/2-20 and 1/4 NPT bottom connections are similar in appearance. The Zahm & Nagel gauge with bleeder valve isa 1/2-20 thread while allother gauges are 1/8NPT or 1/4 NPT pipe threads.

The Model8000-P is an extremely accurate pneumaticgauge tester

It is simple to use and requires no messyoils or lubricants. Cost is much less than a comparable dead weight tester.

Unit comes standard with a 100psi NIST certified test gauge.

Standard test gauge has been calibrated at 5 points: 30, 35, 40, 45, & 50 psi.

Maximum test pressure is 65 psi.

Các nội dung Hướng dẫn mua hàng viết ở đây

Sản phẩm đã thêm vào giỏ hàng

Số lượng:

Giỏ hàng của tôi ( sản phẩm)

Tổng tiền giỏ hàng: